Panigale V4 Club banner

Anyone knows how to remove stock handlebar?

5K views 7 replies 4 participants last post by  paodj13 
#1 ·
Hello fellow v4 owners, I am trying to replace the stock handlebar on my v4 and noticed a pin inside the tube, anyone knows how to remove this pin, do i need any special tools to get it out?

Any help will be greatly appreciated.
 
#2 ·
I’ve replaced bars on other Ducati’s and those pins are to set the controls back in place . In my experience you can’t remove them . You just have to put the controls in place and tighten them down ... the pins are like a set point for the stock controls . If I’m off on this let me know but I’ve replaced bars on a 1098 and a multistrada and they were both the same set pin for control locations
 
#3 ·
Thanks for your insight, i have also removed the stock handlebar on a 1098 and it was super easy but on the panigale v4 the metal pin is preventing me from removing the stock handlebar, there must be a way to get it out, will do some more research and try different tools to see if it works.
 
Top