Anyone knows how to remove stock handlebar? - Ducati Panigale V4 Forum
 
LinkBack Thread Tools
post #1 of 8 (permalink) Old 09-17-2019, 06:35 PM Thread Starter
Junior Member
 
Franky Ducati's Avatar
 
Join Date: Sep 2018
Posts: 12
Anyone knows how to remove stock handlebar?

Hello fellow v4 owners, I am trying to replace the stock handlebar on my v4 and noticed a pin inside the tube, anyone knows how to remove this pin, do i need any special tools to get it out?

Any help will be greatly appreciated.
Franky Ducati is offline  
post #2 of 8 (permalink) Old 09-17-2019, 07:39 PM
Senior Member
 
German4rings's Avatar
 
Join Date: Apr 2018
Posts: 143
Garage
Quote:
Originally Posted by Franky Ducati View Post
Hello fellow v4 owners, I am trying to replace the stock handlebar on my v4 and noticed a pin inside the tube, anyone knows how to remove this pin, do i need any special tools to get it out?

Any help will be greatly appreciated.
Iíve replaced bars on other Ducatiís and those pins are to set the controls back in place . In my experience you canít remove them . You just have to put the controls in place and tighten them down ... the pins are like a set point for the stock controls . If Iím off on this let me know but Iíve replaced bars on a 1098 and a multistrada and they were both the same set pin for control locations

grip bars , grab throttle and twist !
German4rings is offline  
post #3 of 8 (permalink) Old 09-17-2019, 07:44 PM Thread Starter
Junior Member
 
Franky Ducati's Avatar
 
Join Date: Sep 2018
Posts: 12
Quote:
Originally Posted by German4rings View Post
Iíve replaced bars on other Ducatiís and those pins are to set the controls back in place . In my experience you canít remove them . You just have to put the controls in place and tighten them down ... the pins are like a set point for the stock controls . If Iím off on this let me know but Iíve replaced bars on a 1098 and a multistrada and they were both the same set pin for control locations
Thanks for your insight, i have also removed the stock handlebar on a 1098 and it was super easy but on the panigale v4 the metal pin is preventing me from removing the stock handlebar, there must be a way to get it out, will do some more research and try different tools to see if it works.
Franky Ducati is offline  
post #4 of 8 (permalink) Old 09-17-2019, 09:21 PM
Senior Member
 
German4rings's Avatar
 
Join Date: Apr 2018
Posts: 143
Garage
Quote:
Originally Posted by Franky Ducati View Post
Thanks for your insight, i have also removed the stock handlebar on a 1098 and it was super easy but on the panigale v4 the metal pin is preventing me from removing the stock handlebar, there must be a way to get it out, will do some more research and try different tools to see if it works.
Iím just curious at this point . Whereís the pin located and how is it preventing you from removing the bars ... thanks for the info in advance .

grip bars , grab throttle and twist !
German4rings is offline  
post #5 of 8 (permalink) Old 09-17-2019, 10:12 PM Thread Starter
Junior Member
 
Franky Ducati's Avatar
 
Join Date: Sep 2018
Posts: 12
Quote:
Originally Posted by German4rings View Post
Iím just curious at this point . Whereís the pin located and how is it preventing you from removing the bars ... thanks for the info in advance .
here is a picture of the left handlebar
Attached Thumbnails
Click image for larger version

Name:	20190917_200750.jpg
Views:	37
Size:	116.2 KB
ID:	846  
Franky Ducati is offline  
post #6 of 8 (permalink) Old 09-17-2019, 11:01 PM Thread Starter
Junior Member
 
Franky Ducati's Avatar
 
Join Date: Sep 2018
Posts: 12
here is a diagram showing the pin/spring #8 and #9 (Part Numbers 86150331A & 86050171A)
Attached Thumbnails
Click image for larger version

Name:	handlebar pin.jpg
Views:	39
Size:	75.8 KB
ID:	848  
Franky Ducati is offline  
post #7 of 8 (permalink) Old 09-22-2019, 02:43 AM
Senior Member
 
oleary's Avatar
 
Join Date: Dec 2017
Posts: 120
Quote:
Originally Posted by Franky Ducati View Post
here is a diagram showing the pin/spring #8 and #9 (Part Numbers 86150331A & 86050171A)
The first thing I do when I get any new bike is knock all these pins out and position the controls my body.

Hammer, punch and pliers should do the job.

2008 S4RS Tricolore
2008 848>1040 (track)
2011 MTS S-Touring
2014 1199S Panigale (track)
2018 V4S Panigale (track)
oleary is offline  
post #8 of 8 (permalink) Old 09-23-2019, 11:40 PM Thread Starter
Junior Member
 
Franky Ducati's Avatar
 
Join Date: Sep 2018
Posts: 12
thanks i was able to get them out using a needle nose pliers, dont know why ducati uses these pins but i was able to replace these pins with the same size screw so they are now much easier to remove the next time.
Franky Ducati is offline  
Reply

Thread Tools
Show Printable Version Show Printable Version
Email this Page Email this Page



Similar Threads
Thread Thread Starter Forum Replies Last Post
FS: Stock items for sale tyr Misc Equipment 5 09-29-2019 11:01 PM
Weight of stock wheels? Zak Smith Panigale V4 Wheels And Tires 2 02-25-2019 02:33 AM
remove exup valvle?? eddyV4 Panigale V4 Exhaust And Headers 14 08-29-2018 05:47 AM

Posting Rules  
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On

 
For the best viewing experience please update your browser to Google Chrome